You have successfully flashed stock ROM on your Skytex Skypad 7 SP729 Android device. Step 8: Once the flashing process is finished, you will able to see “ Finish” message in Phoenix USB pro flash tool Window. Step 7: Once your device is successfully detected by the flash tool, stock ROM flashing process will start automatically and it will get finished in 3-5 minutes. After connecting your device to the computer, keep holding the Volume Down key and press the Power button three times to allow Phoenix USB pro to detect your device. Once done, press and hold the Volume Down key and connect your device to the computer using the original USB data cable. Step 6: Now switch off your Android device and remove its battery (if it is removable). Once you have done that, you will able to see a Green Tick mark in Phoenix USB Pro Window, which means that everything is ready for the stock ROM flashing process. Step 5: Once the stock ROM is loaded, click on “ Start” button in the tool. Step 4: Now click on “ image” button and load the “ stock ROM.img” file from Step 1.
PHOENIX USB PRO INSTALL
Step 3: Next, download Phoenix USB Pro tool and install it in your computer. Step 2: Now install Skytex Skypad 7 SP729 USB drivers in your computer. Once done, extract the zip file to get the “ stock ROM.img” of your device.
Step 1: To get started, download the stock ROM file from the link given above.
PHOENIX USB PRO HOW TO
Stock ROM File Name: Skytex_Skypad_7_SP729_20131105_PS.zipĭownload Now How To Flash Stock ROM On Your Device The download file contains the USB driver, IMEI Tool and the stock ROM file. We have given the direct link to download Skytex Skypad 7 SP729 stock ROM.ĭownload Skytex Skypad 7 SP729 stock ROM from here, flash it in your device and enjoy the native Android experience again. Are you looking for the stock ROM of your device Skytex Skypad 7 SP729? If yes your answer, you are on the right page.
0 kommentar(er)
